ALPHA-NUMERIC TRANSDUCER
|
||||
|
|
AUTO POTENTIZER: PHOTOS AND SPECIFICATIONS
ALPHA-NUMERIC TRANSDUCER – AUTO POTENTIZER This version of the Alpha-Numeric Transducer is much less powerful than the Dual (Auto-Manual) version. METHOD: The Alpha-Numeric Transducer uses different engineering methods to both resistive (Drown-type) and Magneto-Geometric instruments. The technique may be called Capacitative Transductance. CONTROLS: The instrument has identical 8 card slots. This capacity allows complex treatments to be given. All potency settings and treatment timings are made by the instrument automatically. The Pulse signal is not required by the AUTO POTENTIZER version. The instrument will provide its own signal modulation internally.ENERGETIC ALIGNMENT & ARTEFACTS: Energetic alignment may be a problem in Radionic instruments. Numerous treatments and the use of multiple witnesses may lead to the build-of energetic artefacts which lower the effectiveness of the instrument. The Alpha-Numeric Transmitter Auto Potentizer is self-cleaning to keep it free from such artefacts. This does not interfere with the treatment process. LINK: Two instruments may be linked together via the EXT. socket located at the rear of the front panel. This is a standard RCA-type phono socket. Thus up to 16 cards may be used in any one treatment. SIMULATION: The ANT instrument may be used to make simulated remedies. A typical simulation is the making of homoeopathic remedies from programmable cards charged by the LRI instrument, Radionic codes or MGA. Remedies may be simulated into a suitable carrier such as water or sac lac, as in homoeopathic practice. Any cards which are placed in the instrument, including ANT cards, may be simulated into the carrier. The AUTO Potentizer instrument will create a remedy at the default potency of 6x. HOWEVER, if the patient’s witness is placed in the Well with the carrier substance the instrument will automatically create a remedy matched to the patient’s needs using potencies from the entire available range. WELL: The Well is located at the front of the instrument. The patient’s witness is placed in the when performing a treatment. The carrier material is placed in the Well when simulating a remedy. Unless it becomes contaminated with dirt, dust or grease etc it is not necessary to clean the well. Any energetic artefacts or imprints from the witness will be automatically removed. PHYSICAL DIMENSIONS: The instrument is 350 long x 201 wide x 74mm high (13.78 x 7.91 x 2.91 inches). The feet add a further 8mm (.31 inches) to the height. Weight is approximately 1.1 kilos (2.4 pounds).
|
